ELECTRO-LUBER™

ORIGINAL Automatic Lubricator

The classic ELECTRO-LUBER™ was developed in 1982.  The ELECTRO-LUBER™ uses an electro-chemical reaction which converts electrical energy into safe, inert, nitrogen gas.  The gas is trapped in a hermetically sealed bellows type gas chamber.  As the gas is produced, pressure builds up in the bellows and is applied against a piston which pushes the lubricant out.  The ELECTRO-LUBER™ can be set to empty in intervals varying between 15 days to 1 year simply by the selection of the appropraite DIP switch.  The selection can be changed or the unit turned off at any time.

Dimensions

  • Micro-Luber: 4 7/8” high x 3 1/8” dia.
  • Mini-Luber: 5 5/8” high x 3 1/8” dia.
  • Budget-Luber: 6 1/8” high x 4” dia.
  • Jumbo-Luber: 6 3/4” high x 4 3/4” dia.

Features & Specifications

  • Self-Contained, stand-alone automatic, single-point lubricator
  • Continuous lubrication using safe, inert, nitrogen gas. Continuous lubrication of bearings removes and protects foreign matter from entering, slows oxidation, aids in dissipating heat, and ensures a constant supply of fresh lubricant
  • Available in 4 sizes: (60cc, 125cc, 250cc or 475cc)
  • Can generate pressures up to 55psi
  • ATEX Certified Intrinsically Safe for use in hazardous areas
  • Multiple settings to empty from 15 days to 1 year
  • Suitable for indoor/outdoor use
  • May be remotely mounted upto 3’ (1m.)
  • Filled with customer specified lubricant
  • Temperature Range: -40°F to +132°F (-40°C to +55°C)
  • (NOTE: Low Temp lubricants must be used at low temperatures)

Demonstration Video